A horn or light flash will occur each pressĤ. Press unlock button 5 times at 1 second intervals. Lock car mechanically using 2nd key (i used the boot lock), you can use either boot or door lockģ.

Use the steps outlined here to clear out all your addresses:Ģ. Insert the new key in the ignition and turn to the ON position (do not start car). Turn the ignition key to OFF and remove the old key. Wait 5 seconds and press the unlock button on the new key to unlock the door. The car may give you some sort of acknowledgment as the button is pressed (lights flash, horn beep, etc.) Press the UNLOCK button on the new key within 5 seconds often enough to reach next memory position (so, if the value in field, you should press the new key's unlock button twice, to put the new key in memory position 2). Lock the car from outside using the new, unmatched key in the driver-side door lock. If you don't have vcds just do the section that does not require it: You can do this part without vcds( I believe I did because I didn't have vcds at the time).but having vcds just gives you a visual confirmation. The one that is not programmed you use in the ignition. Use the remote with fob in the door for the one you want to program. Once you have accomplished that I did the remote control matching procedure.I did it with window open in case things went wrong. Anyone who only has one key I would advise to have a second key cut for obvious reasons plus the procedure in the link uses two to program:įirst you are going to use a key in the driver door lock to clear all memory. All supported fault codes (only for KWP-2000 *) VCDS 18.I had one key to start with.then I bought the remote from ECS and another key cut from ebay. Log (known under KWP-2000 * Coding II)ġ3.

Slave control module for coding (only for KWP-2000 *)ĩ.-channel read (applies only to KWP-1281 *)ġ1.

Selective output test (only for KWP-2000 *) Supports Language: English, French, German, Russian, Italian, Swedish, Danish, Czech, polish, Dutch, Hungarian, Portuguese, Spanish, Slovenia, RomaniaĬar list: For AUDI, For VW, For SKODA, For Seat etc. VCDS 18.9 interface doesn’t supports online update, if you are intersted in 1:1 original plan supports update onine VCDS cable, check VCDS hex and VCDS HEX V2.

With auto scan ,control module unit information, read fault codes, Output Test, Basic settings, clear DTCs etc funtions, support multilanguage including：French, German, Russian, Italian, Swedish, Danish, Czech, polish, Dutch, Hungarian, Portuguese, Spanish, Slovenia, Romania. VCDS crack interface is an inexpensive car diagnostic tool for vag group.

Vcds program key